- 1 How do you make a theatre flat?
- 2 Which wood is used for covering theatrical flats?
- 3 How do I get a Hollywood flat?
- 4 How do you make a soft cover flat?
- 5 Why are stage flats light weight?
- 6 How many toggles should be in a 12 foot flat?
- 7 What is the difference between a flat and a platform theater?
- 8 What material is stapled onto the flat frame?
- 9 What is a drop in theater?
- 10 Which crew member is responsible for shifting scenery?
- 11 What is a stage drop?
- 12 What is best used to attach theatrical flats to each other?
- 13 What is a thrust stage and how are the audiences arranged around the stage?
How do you make a theatre flat?
To create a stage flat, you’ll need:
- Muslin or Canvas fabric.
- Pine lumber for frame. 1×2-inch (20 by 45 mm), 1×3-inch (20 by 65 mm) or 1×4-inch (20 by 90 mm)
- Luan plywood. 1/4-inch (6 mm) or 1/8-inch (3 mm)
- Miter saw.
- Staple gun.
- Carpenters glue.
Which wood is used for covering theatrical flats?
Broadway or stage flats are generally constructed of 1-by-3-inch (25 mm × 76 mm) nominal ( 3⁄4 by 21⁄2 inches or 19 by 64 millimetres actual) pine boards. The boards are laid out flat on the shop floor, squared, and joined with the keystones and corner blocks.
How do I get a Hollywood flat?
A Hollywood flat is made by turning the boards on their edges to make a three-dimensional, box-like frame. Each type is uniform in size and design so they can be stacked together and stored in a small space. You can build theatre flats from lumber, plywood, and cloth.
How do you make a soft cover flat?
Soft covers are usually made from a cloth called muslin. To cover your flat staple muslin to one edge of the flat. Glue the width the frame on that side. Then stretch the muslin to the other end and staple it tight.
Why are stage flats light weight?
A flat is a lightweight timber frame covered with scenic canvas, or plywood. Flats are used to provide a lightweight and easy to move and re-configure backdrop to a stage set. The plywood or cloth can be replaced when it gets worn, keeping the frame intact for many years.
How many toggles should be in a 12 foot flat?
This is called the TOGGLE Toggles should be placed every 4 feet (i.e. on a 12 foot flat you would have 2 toggles ) Measure and cut two pieces of 1×4.
What is the difference between a flat and a platform theater?
Unsourced material may be challenged and removed. In theatre, a platform (also referred to as a riser or rostrum) is a stationary, standard flat walking surface for actors to perform on. This is in contrast to scenery wagons, which are mobile platforms that are supported by casters instead of feet.
What material is stapled onto the flat frame?
Staples by themselves are not strong enough, but with glue are very fast and permanent. Once the frame is built, it is covered with muslin or canvas. The canvas is layed on the frame smoothly but not tightly. It is then stapled to the frame along the inside edge about every 6-8″.
What is a drop in theater?
(Theatre) theatre a curtain that is suspended from the flies and can be raised and lowered onto the stage. Also called: drop cloth or drop.
Which crew member is responsible for shifting scenery?
Run crew (sometimes called Deck Crew) are the crew members that power the scene changes, prop handoffs and onstage “magic” for each production. This may include, but not limited to, moving scenic units, operated flying scenery, striking and setting of props on stage, and so on.
What is a stage drop?
elevator stage, drop stage, lift stage A theater stage floor which moves vertically on an elevator, usually so that one set can quickly replace another; may consist of a single unit or articulated sections.
What is best used to attach theatrical flats to each other?
Flats can be attached to each other for the duration of the run. For a straight wall, flats are connected using battens. Battens: simply boards, 1×3 or 1×4. If the wall is not too large, lay the boards flat on the back of flats and screw battens to frame of the flats with drywall or utility screws.
What is a thrust stage and how are the audiences arranged around the stage?
A thrust theatre stage is known by its arrangement which consists of being surrounded by audience on three sides. The Fourth side serves as the background. Often the playing area is of square or rectangular shape, usually raised and surrounded by raked seating.